For wall-hung WC For mounting in front of a support wall or into a plasterboard construction For floor thickness 0–200 mm For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm Adjustable anchor feet and a spring-lock system, with a range of 0–200 mm Visible marks for both levelling and the centerline The sliding rail holder for the waste connector can be set to eight positions between 0–93 mm Angle valve with check valve compatible with Mepla piping system The frame allows the anchoring to a separate sufficiently strong plasterboard partition, in front of the bearing wall The installed module is covered with a plasterboard panel and there is no need for any additional fixing or anchoring elements The construction of polystyrene insulation prevents condensation from forming on the surface of the tank and dampens the vibrations from the tank into the building structure Prepared for connecting a bracket with a DG 1/2” conversion for bidet seats and sprays Dual flush independently adjustable with hygienic reserve Suitable for installation of remote or sensor flushing Compatible with all ALCA flush plates Maintenance work without using any tools Water supply from the rear/top The cistern is made of one piece, thus ensuring 100% impermeability The service opening cover simplifies assembly and prevents the penetration of moisture and impurities Installation depth adjustable from 20–95 mm Installation depth 125 mm Frame material: powder-coated metal Wall Hung Toilet Frame and Concealed Cistern AM101 certified according to WRAS standard (certificate no. 2206330) Water connection from the back or top via mounting holes G1/2 “ Functional range of water pressure 0,05 – 1,0 MPa Recommended range of water pressure 0,3 – 0,5 MPa Big flush 6 – 9 l Small flush 2,5 – 3,5 l Factory setting of large flush 6 l Factory setting of small flush 3 l Hygienic reserve 3 l Water volume in the cistern 9 l Load test 400 kg
